countersink
读音:['kauntə.siŋk]
v. 张扪孔口, 钻孔装埋, 打埋头孔n. 皿锥, 埋头孔, 暗钉眼
词形变化:
动词过去式: countersunk | 动词过去分词: countersunk | 动词现在分词: countersinking | 动词第三人称单数: countersinks |
vt.
钻孔装埋
n.
皿锥; 埋头孔; 暗钉眼
countersink
过去式:countersank
过去分词:countersunk
现在进行时:countersinking
词形变化:
动词过去式: countersunk | 动词过去分词: countersunk | 动词现在分词: countersinking | 动词第三人称单数: countersinks |
countersinkcountersinkD.J.:[ˈkauntəsiŋk]K.K.:[ˈkaʊntɚˌsɪŋk]vt.1.翻译:钻孔装埋,打埋头孔n.
1.翻译:埋头孔,暗钉眼
countersink['kauntə,siŋk]vt.
1.翻译:钻埋头孔,穿孔;打埋头孔于
2.翻译:将(螺钉等)装入埋头孔n.
1.翻译:【机械学】埋头钻,锥口钻
2.翻译:埋头孔,锥口孔变形vt.countersankcountersunkcountersinking
1.翻译:(-sunk[ˈ-sʌŋk])钻埋头孔, 锥形扩孔, 冲锥形沉孔, 划尖底眼词性变化countersink[ˈkauntəsiŋk]n.
1.翻译:埋头孔, 锥口孔
2.翻译:埋头钻, 锥口钻, 尖底锪钻继承用法countersunk[ˈkaʊntəsʌŋk]adj.
1.翻译:埋头的 countersink
(past and past participle -sunk)
[with obj.]enlarge and bevel the rim of (a drilled hole) so that a screw, nail, or bolt can be inserted flush with the surface
扩钻(孔端)成埋头孔;打埋头孔于
翻译:drive (a screw, nail, or bolt) into such a hole
把(螺丝钉等)钻入埋头孔
countersink
名词 countersink:
a hole (usually in wood) with the top part enlarged so that a screw or bolt will fit into it and lie below the surface
a bit for enlarging the upper part of a hole
同义词:counterbore, countersink bit
动词 countersink:
insert (a nail or screw below the surface, as into a countersink)
同义词:set
特殊用法Broughton countersink1.翻译:布劳顿锥坑钻emery countersink
1.翻译:金刚砂埋头钻machine countersink
1.翻译:机用锥形锪钻multiple-cutting-edge countersink
1.翻译:多刃锥口钻rose countersink
1.翻译:菊花钻snail countersink
1.翻译:螺旋锥口钻sole cutting edge countersink
1.翻译:单刃锥口钻
countersink
1. A tool for making a countersink.
做螺丝钉孔的工具
2. sole cutting edge countersink
单刃锥口钻
3. countersink angle
埋头孔角
4. countersink reamer
埋头孔铰刀
5. countersink head screw
埋头螺丝
6. screw pin countersink shackle
埋头螺丝卸扣
7. countersink bolt
埋头螺栓
8. countersink drill
埋头钻 锥口钻 尖底锪钻
9. countersink bit
埋头钻
10. countersink head rivet
埋头铆钉
11. Orthopaedic instruments.Drills, taps and countersink cutters for use with osteosynthese screws with asymmetrical thread and spherical under-surfaces.
外科医疗器械.矫形外科器械.带不对称螺纹和球形下表面的骨缝术螺钉用钻、丝锥和沉头钻(Medico-surgical equipment.
12. multiple-cutting-edge countersink
多刃口锥口钻
13. multiple-cutting edge countersink
多刃锥口钻
14. Application of Floating Positioning Countersink Drill
定位浮动式锪刀的应用
15. Take the replenishment to countersink the end face with guide pillars of aids to navigation
对航标带导柱的端面锪钻的补充
16. To drive(a screw or bolt) into a countersink.
将钻或螺栓置入埋头孔
17. countersink (drill)
尖底锪钻
18. drill and countersink combination
尖角钝角两用钻
19. Broughton countersink
布劳顿锥坑钻
20. double-lip countersink bit
带安全锥埋头钻头
21. countersink for wood working
木工锥口钻
22. machine countersink drill
机械埋头钻嘴
23. machine countersink
机用锥形锪钻
24. countersink porcelain teeth
瓷充填
25. combined drill and countersink
组合中心钻 带护锥复合中心钻
26. rose countersink
菊花钻
27. snail countersink
螺旋锥口钻
28. An Analysis on Methods for Measuring the Countersink Height of Bolt
螺栓沉头高度测量方法分析
29. emery countersink
金刚砂埋头钻
30. countersink tooth crown
钉孔冠
31. brace countersink
钝角菊花形尖头板钻
32. Application of Press Slurry after Countersink Piling Technology
钻孔桩后压浆技术应用
33. Keywords countersink diameter;peg;grip;
钻孔直径;销钉;握着力;