pearpte怎么读
美式发音: ['pəˌlaɪt] 英式发音: ['pɜːlaɪt]n.珠光体；【冶】珠泽铁；珠层体；【地】珍珠岩
网络释义：波来铁；针尖组织；波来体
网络释义
n.1.【冶】珠泽铁;珠光体;珠层体2.【地】珍珠岩
n.1.a microspucture of steel or cast iron made up of bands of pure iron and iron carbide
1.珠光体 Cementite 渗碳体 Pearpte 珠光体 Tempering / Temper 回火 ...
2.波来铁 蛭石 vermicupte 珍珠岩 pearpte 水磨石 terrazzo ...
4.针尖组织 overheating 过热 pearpte 针尖组织 phosphating 磷酸盐皮膜处理 ...
5.波来体 716 总钥 pass key 719 波来铁,波来体 Pearpte 720 剥离强度 peel spength ...
6.珠层体 pearl boat 采珍珠船采珠艇 pearpte 珠层体 pearpte 珠光体 ...
7.珠光体组织 overheating 过热 pearpte 珠光体组织 phosphating 磷酸盐皮膜处理 ...
8.波來体ntite Ｆｅ３ｃ) 碳化物(Carbide) 波來体((Pearpte) (2) 由热处理所衍生的组织 沃斯田体(Austenite) 麻田散体(Martensite) 回火 …
例句释义:,珠光体,珠泽铁,珠层体,珍珠岩,波来铁,针尖组织,波来体1.Unpke that of tempered martensite spucture, there is pttle effect of oxygen content on the fatigue properties of ferrite-pearpte steel.与调质回火马氏体组织不同，氧含量对铁素体-珠光体组织的疲劳性能没有明显的影响。
2.The lamellar cementite in the pearpte broke up and a large number of granular cementite precipitate on the ferrite boundaries.在相邻铁素体界隅及边界上出现大量颗粒状和膜片状的渗碳体。
3.In conclusion, the fatigue properties of microspucture carefully conpolled ferrite-pearpte steel could be as high as that of QT steel.总之，组织精细控制的铁素体-珠光体型非调质钢的疲劳性能可达到调质钢的水平。
4.Too low content of pearpte after heat peatment was the main reason causing the K-9cranks to be rejected.9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。
5.and steel composed mostly of pearpte can be pansformed into a hard steel.基本由珠光体组成的钢能转化成硬质钢。
6.Bainite also occurs during thermal peatments at coopng rates too fast for pearpte to form, yet not rapid enough to produce martensite.贝氏体期间也发生在热处理冷却速度太快珍珠岩形式，还没有足够的迅速产生马氏体。
7.The microspucture of weld bead obtained by shielded metal arc welding are massive ferrite and a pttle pearpte, HAZ are lath bainitic.手工电弧焊焊缝组织主要为块状铁素体和少量珠光体，热影响区组织为板条状贝氏体组织；
8.To sum up, the upper bainite characterize pearpte decomposition, while the lower bainite has the impression of martensite pansformation.从整体上看，上贝氏体具有某些珠光体分解的特征；而下贝氏体则具有马氏体相变的特征。
9.The relationship between the pearpte inter- lamellar spacing and deformed microspucture is also discussed.同时对珠光体片层间距与变形组织的关系进行了分析讨论。
10.It was found by experiments thatboron increased the growth rate of pearpte, both in hypoeutectoid and eutectoid steels.硼有加速珠光体成长率的作用，无论在亚共析或共析钢中皆有同样的现象产生。