turbine：[英 [ˈtɜ:baɪn] 美 [ˈtɜ:rbaɪn] ]
turbine是什么意思
复数形式：turbines;
turbine 基本解释turbine的近义词
名词汽轮机; 涡轮机; 透平机
turbine 网络解释
1. 涡轮机：荏原制造所创立于1912年,主要从事泵(PUMP)、EBARA、涡轮机(TURBINE)、冷冻机(CHILLER)等转动机械之制造,在风、水力相关制造业中达到世界顶级的水平. 现在以本身的高技术能力为基础,分成(机械)、(环境技术)、(精密.电子)、(情报.通信)等四个主力事业部门,
2. 涡轮：现任职於俄国中央航空发动机研究中心(TsIAM)之发动机电子分析部门担任研究员,已有四年经验.有关航空发动机设计方面,不论发动机的种类,均有压缩器(Compressor),燃烧室(Combustor),涡轮(Turbine),喷嘴(Nuzzle)四大部分.空气自发动机进器口流入,
3. 透平机：火力发电及氢气应用:氢气可以用透平机(turbine)或燃料电池来发电,然而这两种技术都需要进一步改良,尤其是将来在发展以氢气作为燃料的汽车及货车时,一定要增加效率,减轻电池或透平机的重量,才有实用价值.
4.
4. 透平：整体叶轮作为透平(Turbine)机械的关键部件,广泛地用于航空、航天等领域,其质量直接影响其空气动力性能和机械效率. 因此它的加工技术一直是透平制造行业中的一个重要课题. 目前国外一般应用整体叶轮的五坐标加工专用软件[1],
5. turbine：turb; 涡轮(机
turbine 双语例句1. turbine的翻译
1. Firstly, the system dynamics model of the LRE and the structural and damage models of the critical component are built. With these models the computations and analyses are carried out. Some results are obtained. For example, developed is the LRESim, a universal simulation module library for the LRE, which can be applied to investigate the related problems of the startup transient and the steady state process, or to demonstrate the different schemes in the phase of design of LRE. The finite element method and the intensity calculating method are used to analyze the structural dynamic characteristics, respectively. It is a kind of preferable method in analyzing real-time online structural dynamic characteristics at present. The ICM acts as a main online computing method, while the FEM provides offline correction for the computing results. The damage-calculating model based on the continuous time is built for the material constructed turbine blades. The simulation computations are carried out. The results indicate that the model is suit of this research. Secondly, the main innovative works are introduced.
分别进行了发动机系统动力学模型的建立与仿真分析、关键部件结构与损伤模型的建立与仿真分析的研究，得到如下结果：开发了一种比较通用的液体火箭发动机模块化仿真模块库LRESim，可用其仿真研究发动机起动、稳态等工作过程以及不同的发动机系统方案设计中的有关问题；通过比较研究有限元方法与强度计算方法在涡轮叶片结构动特性分析中的适用性问题，提出以强度计算方法在线应用为主，结合有限元方法的离线修正是现阶段进行结构动特性实时在线分析的一种较好方法；建立了涡轮叶片材料基于时域的损伤计算模型，经仿真计算分析，表明该模型适应本文的研究要求。
2. To prevent possible danger to the wind turbine struc-ture, it may be advisable to s
为防止风机结构上可能的危险，建议在风速极高情况下（如：V≥0.8*Vref）抑制解缆操作
3. turbine什么意思
3. The Kamov Ka-26, which has the NATO codename Hoodlum, was announced in January 1964 as a light commercial helicopter with twin-turbine powerplant and a design making it easily convertible to meet the requirements of several roles.
该卡莫夫嘉- 26，它有北约代号流氓，宣布在1964年1月作为一个光与双涡轮发动机，设计使它很容易转换为符合数个角色的要求，商业直升机。
4. turbine的意思
4. When we effectively create a continuous explosion in our combustion chambers, what's to stop that explosion exiting the wrong way out of the compressor as opposed to out of the turbine?
当我们有效地创建一个我们的燃烧室连续爆炸，什么能够阻挡的爆炸退出走出，而不是走出透平压缩机走错了路？
5. turbine
5. This paper atudles two lmpartaut proLlems in the`epaitiug of the cracks on high presauare ateam turbine casings by means of electric are welding, namuly, the preheating of the workiece before welding and the aubsequent heat treatment, and also introduces the correspunding methods adopted:(1)Using induction heating method to bring the temperature of the work piece to the desired vaules without producing residual deformation, (2)By measn of follow-up tempering on the welded beade, not only to keep the mechanieal p...
本文对高压汽轮机汽缸裂纹补焊技术中存在的两个主要问题——预热和热处理问题，分别提出了现实可行的方法，即：1。无变形工频感应预热的方法。用这种方法在预热温度范围内加热，可以使经过精加工的汽缸不产生残余变形。2。跟踪回火的方法。用这种方法处理每一焊道，不但可以使补焊区的金属性能和残余应力与一般回火处理基本相同，而且不致因回火处理而增大工件的变形量。
6. This paper atudles two lmpartaut proLlems in the`epaitiug of the cracks on high presauare ateam turbine casings by means of electric are welding, namuly, the preheating of the workiece before welding and the aubsequent heat treatment, and also introduces the correspunding methods adopted:(1)Using induction heat ing method to bring the temperature of the work piece to the desired vaules without producing residual deformation, (2)By measn of follow-up tempering on the welded beade, not only to keep the...
本文对高压汽轮机汽缸裂纹补焊技术中存在的两个主要问题——预热和热处理问题，分别提出了现实可行的方法，即：1。无变形工频感应预热的方法。用这种方法在预热温度范围内加热，可以使经过精加工的汽缸不产生残余变形。2。跟踪回火的方法。用这种方法处理每一焊道，不但可以使补焊区的金属性能和残余应力与一般回火处理基本相同，而且不致因回火处理而增大工件的变形量。
7. Platzer says the water flow through the underwater generator has a power density of 36 kilowatts per square metre – far more than the 1.2 kilowatts per square metre typical of air blowing through a rotating wind turbine.
Platzer说，水下发电机的水流功率密度为每平方米36千瓦，大大高于风力涡轮机气体的每平方米1.2千瓦。
8. The characteristic equations for oil ejector in lube oil system of steam turbine are established to simulate ejector characteristics in the oil supply system for 600MW steam turbine.
建立了射油器的数学模型，对600MW机组射油器进行了仿真研究，为汽轮机润滑油系统的仿真及故障诊断建立了基础。
9. In this project, impellers fit for the concentrated wind energy turbine were designed and made according to the fluid mechanics, aerodynamics, dynamic similarity principle, optimization for impeller design and wind tunnel test were done. Design system of serial impeller of CWET was established based on the domestic and overseas design theory and wind tunnel test.
该项目根据流体力学和空气动力学理论、相似理论、叶轮设计的优化理论研制了适合浓缩风能型风力发电机独特的叶轮并进行风洞实验，并根据国内外叶轮的设计理论及风洞实验结果归纳建立大、中、小型浓缩风能型风力发电机的系列化叶轮的设计理论体系。
10. Quick investment casting; stereolithography pattern; shell cracking; engine turbine nozzle vane
快速铸造；树脂模型；型壳开裂；涡轮导向器
11.
11. Research on the Over critical and Overflow at Variable Conditions of Marine Steam Turbine; 2. Strongly total domination edge critical graphs; 3. This paper measures the critical energy of detonation of hydrocarbon fuel(butane, naphtha, pentene, hexene, JC5) and air mixtures using Bruceton method in the rectangular shock tube.
该文在矩形激波管内采用布鲁塞顿法测定了丁烷、石脑油、戊烯、己烯、JC5等碳氢燃料与空气混合物形成爆轰时所需的临界起爆能，并根据所测定的临界起爆能的大小，分析比较了这几种碳氢燃料的相对爆轰敏感度及相应的安全性能，最后讨论了分子量，分子中键的饱和度和分子结构等因素对碳氢燃料临界起爆能及相应的安全性能的影响。
12. Brush Electrical Machines Ltd is seeking new business opportunities with major Chinese turbine manufacturers for thermal, gas and hydropower applications.
寻求中国大型燃气轮机厂的业务机会，与中国主要资产管理公司建立合作关系，为发电站的建设提供独特的解决方案以及设备。
13.
13. The stagger angle of guide vane and back pressure of the turbine are changed accordingly to solve the problem.
在涡轮改型设计中对导叶采用了弯扭叶片，要求分析导叶形状的变化对发动机性能的影响。
14. Because of complex structure for guide vane of tubular turbine, it is difficulty in manufacture and takes long period.
导叶是导水机构的重要部件之一，贯流式机组导叶结构复杂，加工困难，加工周期长。
15. turbine的反义词
15. The turbine was made in Sweden in 1938, and this was a new power station, he said.
涡轮机是瑞典在1938年生产的。而这是个新的电站。他说。
16. Burks Turbine unique design is engineered for high pressure, low flow applications.
Burks汽轮机独特的设计，应用于高压，低流量应用领域。
17. turbine
17. Fuzzy PID is considered as one of the most prospective method to resolve hydraulic turbine governor s control problem.
模糊PID控制被认为是解决水轮机调节系统控制问题最具发展前景的方向之一。
18. The proposed method is simple and easy to implement in hydraulic turbine governor.
文中所提方法简单，易于在水电机组调速器上实现。
19. Owing to the greatness of hydraulic turbine structure, the noisy energy is great and is difficult to reject.
由于水轮机结构巨大，这一噪声的能量往往较大，剔除它的困难也较大。
20.
20. This paper presents the scheme of a versatile robot for on-site repair of hydraulic turbine blade.
介绍了一种多功能的水轮机叶片坑内修复机器人方案和研究进展。
turbine 词典解释1. 涡轮机;透平机
A turbine is a machine or engine which uses a stream of air, gas, water, or steam to turn a wheel and produce power.
turbine 单语例句turbine什么意思1. Capstone Turbine has shipped thousands of Capstone MicroTurbine systems to customers worldwide.
2. We believe that Capstone Turbine Corp will provide perfect solutions to meet that strategic objective.
3. The Chinese have mounted a robust and successful challenge to European and US dominance in solar panel and wind turbine manufacturing.
4. The turbine will provide electricity for a wastewater pumping station in the Boston suburb of Charleston.
5. IGCC is a clean coal technology that turns coal into a synthetic gas, removing impurities before the gas is burned in a turbine.
6. A slowdown in the growth of gas turbine applications in China has seen the company shift focus to the development of clean coal technology.
7. The city expects to develop a wind industry cluster by attracting power plants and large wind turbine markers such as Goldwind.
8. A worker applies adhesive tape to a wind turbine blade in Tianjin.
9. In a combined cycle power plants natural gas or oil is used in a gas turbine to produce electricity.
10. And 60 percent of all wind turbine gearboxes made in China come from Jiangsu.
turbine在线翻译turbine 英英释义noun
1. rotary engine in which the kinetic energy of a moving fluid is converted into mechanical energy by causing a bladed rotor to rotate