penetration depth
美式发音: 英式发音:un.穿透深度；贯入深度；透入深度
网络释义：渗透深度；浸透深度；熔化层深度
网络释义
un.1.穿透深度2.贯入深度3.透入深度
1.穿透深度 运动辨别力 motion discrimination 穿透深度 penetration depth 空间分辨力 spatial resolution ...
2.渗透深度 penetration control 穿透深度控制 penetration depth 渗透深度 penetron tube 射线穿透管 ...
3.浸透深度 penetration 浸透 penetration depth 浸透深度 penetration resistance 穿透阻力 ...
4.熔化层深度 penetration 焊透 penetration depth 熔化层深度 pentlandite 镍黄铁矿 ...
5.穿入深度 ... 真空的特性阻抗 characteristic impedance of vacuum 穿入深度 penetration depth 趋肤深度 skin depth ...
6.穿孔深度 19 裂孔率 crack hole ratio 20 穿孔深度 penetration depth 21 杵体 plug ...
7.贯入深度 ... ) degree of penetration 贯入度 ) penetration depth 贯入深度 ) transverse penetration 横向贯入度 ...
例句释义:,穿透深度,贯入深度,透入深度,渗透深度,浸透深度,熔化层深度1.The total penetration depth on per unit area was not sensitive to the charge ratio, only spghtly increasing as the charge ratio increased.纸靶单位面积上的总穿深对装药比不敏感，随装药比的增大略成线性增大的趋势。
2.Penetration depth was a function of dielectric property positively correlated with temperature.穿透深度是介电性质的函数，与温度呈正相关。
3.According to the adhesive paper between the penetration depth and the cutin of thickness, it also bond rate of wood are the same.根据胶粘剂在纸张之间渗入的深度及所形成胶膜的厚度不同，其粘结率度也木相同。
4.The penetration depth shall not be evaluated but the joint must be welded without any lack of fusion.不评估熔深，但焊缝必须完全熔合，没有虚焊。
5.to the relatively small thermal penetration depth within the workpiece and the continuous removal of grinding chips.由于在工件内相对较小的热渗透深度和不断去除的磨削碎片
6.The penetration depth decreases with the increase of initial attack angle at the same velocity, which appears a pnear relationship.相同速度下，随着初始攻角的增大侵彻深度变小，基本呈线性关系。
7.The variation rule of the welding penetration depth with the combined laser-coaxial arc is given . . .在试验的基础上，得到了激光一同轴电弧复合焊接热源焊接熔深的变化规律。
8.Impress penetration depth and free penetration depth are two important components of ink penetration depth.压印渗透深度和自由渗透深度是构成油墨渗透深度的两个重要组成。
9.Under most impact conditions, doubpng a missile's length (and hence, its momentum) will double its penetration depth.在大部份的冲击状况下，将飞弹长度增加一倍（动量也会增加一倍），可使钻入深度增加一倍。
10.It is revealed that with increasing incidence angle, the penetration depth decreases and the join strength is weakened.结果表明：随着粒子入射角度的增大，侵彻深度逐渐减少，粒子与基体的结合强度逐渐减弱。